Anti-stripping agents are often overlooked when boosting the performance of asphalt. It is added to asphalt to increase the occurrence and strength of asphalt-aggregate adhesionScope of the Report:The technical barriers ...

Pancreatic cancer is expected to become the second deadliest cancer in the United States by 2030. It is tough to cure because it is usually not discovered until it has reached an advanced stage. This report studies the P...

Glow discharge mass spectrometry (GD-MS) is recognised as one of the ultimate techniques for the characterisation of conductive and non-conductive materials. It is capable of quantifying virtually all elements from lithi...

3D printing or additive manufacturing is a process of making three dimensional solid objects from a digital file. While 3D-Printed Composites is a very important 3D printing material, mainly used in aerospace and automot...

A bogie is a structure underneath a railway vehicle body to which axles and wheels are attached through bearings.Scope of the Report:Europe has the largest global export quantity and manufacturers in Train Bogies market,...

Cold rolling is used to further treat hot rolled steel sheet to increase its strength and its strength-to-weight ratio and enable it to hold tighter tolerances during fabricating and machining. In addition, cold rolling ...

A bicycle lock is a security device used to deter bicycle theft, generally by fastening the bicycle to a fixed object, e.g., a bike rack.Scope of the Report:Bike Locks are mainly classified into the following types: U-lo...

Electrical Grade Fused Magnesia (FM) is produced by smelting of calcined magnesia in electric arc furnaces at above 3000¡C. Electrical Grade Fused Magnesia is considered to be one of the best thermal and electrical insu...

Stainless steel cannula is a cannula which is made from a stainless steel tube with a Deflected Cannula or Blunt Cannula. Stainless steel cannula can permit a safe liquid or gas transfer between sites. The sterile device...

Aluminum Extrusion is a plastic deformation process in which a solid cylinder of aluminum (billet) is forced by compression through a smaller die opening. The billet is typically preheated to facilitate the deformation p...